background image

Continuous Rating (W)

Voltage (V)

Cycle (Hz)

Input

Output

Max. Output(W)

110
120

220
230
240

14.5

15

7.2
6.9
6.6

50/60
50/60

50/60
50/60
50/60

1,510
1,700

1,510
1,510
1,510

650
950

650
650
650

1,600
1,600

1,600
1,600
1,600

Models No.

 Description

PRODUCT

Current (A)

T

ECHNICAL INFORMATION

C

ONCEPT AND MAIN APPLICATIONS

 

S

pecification

S

tandard equipment

O

ptional accessories

Note: The standard equipment for the tool shown above may differ by country.

P 1 / 15

JR3070CT

Recipro Saw

Dimensions: mm (")

Width (W)

Height (H)

Length (L)

485 (19-1/8) 

99 (3-7/8) 

181 (7-1/8) 

Model JR3070CT has been developed as the highest specification
model in Makita Recipro Saws.
Features electronic control and orbital mechanism for extra-high
cutting efficiency while ensuring low vibration performance with
our innovative AVT (Anti-Vibration Technology).
Additionally, provides more control and comfort with toolless
blade change, toolless shoe adjustment and rubberized soft grip.

L

H

W

North America:
Recipro saw blade (for Steel)
Recipro saw blade (for Composite)
Steel carrying case

All countries other than North America:
Recipro saw blades No.21 (for Steel)
Recipro saw blades No.22 (for Steel)
Recipro saw blade No.23 (for Wood and Plywood)
Plastic carrying case

Recipro saw blades No.21, 22, 24 (for Steel)
Recipro saw blade No.23, 23B (for Wood and Plywood)

Stroke per minute: min-

1

Variable speed control

Net weight: kg (lbs)

Power supply cord: m (ft)

Capacity

*Wood: mm (")

Pipe: dia. mm (")

Length of Stroke: mm (")

0 - 2,800

32 (1-1/4)

255 (10)

130 (5-1/8)

4.4 (9.7)

Europe: 4.0 (13.1)

Australia: 2.0 (6.6)

Other countries: 2.5 (8.2)

Yes

*when cutting with the supplied 300mm (11-3/4") length recipro saw blade.

Содержание JR3070CT
















Отзывы: