[3] DISASSEMBLY/ASSEMBLY
[3] -3. Toolless blade holder section (Model JR100D) (cont.)
ASSEMBLING
(1) Assemble Blade guide to Slider in case Blade guide is removed from Slider (
Fig. 9
).
Fig. 17
8. Hold Gear housing with vise and grip Connecting sleeve
with Water pump pliers over a cloth so as not to damage it.
Turn
Driving sleeve
90 degrees
while pressing it down.
Now, Protrusions in the Driving sleeve presisely match to
Depressions on Connecting sleeve and groove for
Retaining ring 16 on Guide sleeve comes into your sight
as drawn in
Fig. 18
.
Connecting sleeve
Driving sleeve
Fig. 18
9. Mount the Retaining ring 16 as drawn below.
Groove for
Retaining ring 16
Retaining ring 16
90°
P
9
/ 1
2
R
epair
