[3] DISASSEMBLY/ASSEMBLY
[3]-4. Replacing Blade case
[3]-5. Adjustment
(1) Disassemble Safety cover as drawn in
Fig. 7
.
(2) Disassemble Bearing box section as drawn in
Fig. 8
.
(3) Disassemble Motor section from Blade case as drawn in
Fig. 12
.
(4) Disassemble Base as drawn in
Figs. 3 and 4
. Blade case can be replaced.
1.Insert 1R048 into the clearance between
Blade case and Lever 37 so as to hold
Safety cover and ensure the access to Blade.
Note
: Make sure that Safety cover does not
move before doing step 2.
2. Apply the block of 1R208 to Base and adjust accuracy of
90° by turning M5x8 Hex socket set screw with Hex wrench 2.5
until the ruler plate of 1R208 touches Saw blade.
1R208
Block of 1R208
Ruler plate of 1R208
Saw blade
Safety cover
Hex wrench 2.5
(1) Set the machine as follows.
* Bevel angle: 90°
* Cutting depth: maximum depth
And tighten M6x21 Thumb screw and Lever plate to keep the above conditions.
(2) Adjust accuracy of 90° of Base to Saw blade as drawn in
Fig. 13
.
(3) Adjust the base in parallel to Saw blade as drawn in
Fig. 14
.
1R048
Blade case
Fig. 13
Fig. 14
M5x8 Hex socket head set screw
Note
: Do not turn this M5x8 Hex socket set screw. This works as
a stopper for 6-7 Shoulder pin (hinge of Angular guide).
P 9/ 11
Lever 37
M4x8 Pan head screw (2 pcs.)
Cord guard side of Base
1. Unlock the cord guard side of Base from Blade case by
loosening M4x8 Pan head screw slightly.
2. Move the cord guard side of Base by hand in the direction
of yellow arrows until the distance A is equal to B.
3. After finishing the adjustment, tighten M4x8 Pan head
screw firmly.
A
B
R
epair
