![background image](http://html1.mh-extra.com/html/makita/hs301d/hs301d_manual_4228142016.webp)
W
iring diagram
P 16 / 17
Put Controller (10) to Handle set R (17)
as follows.
* Facing its
three
lead wire side (white),
(yellow), (black) to the bottom of Handle
set R (17)
* Facing its
two
lead wire side (red), (black)
for connecting to DC motor, to Handle
set L side
Two
Lead wires (red), (black) connected to DC Motor
Three
Lead wires (white), (yellow), (black)
connected to Switch and Terminal
The following lead wires has
to be put in this portion.
* Lead wire (black) for
connecting to DC Motor
* Lead wire (black) for
connecting to Terminal
Fig. D-4
(10)
Put the following lead wires between Boss A and Boss B.
* Controller’s lead wire (white) for connecting to Switch
* Controller’s lead wire (yellow) for connecting to Terminal
* Controller’s lead wire (red) for connecting to DC Motor
< Note>
Lead wire (red) for connecting to DC Motor has to
be put on the other lead wires (white), (yellow).
Boss A
Boss B
to DC Motor
to Switch
to Terminal
Wiring of Controller Unit
(17)
(10)