P
7
/
19
DISASSEMBLING
Fig. 10
Fig. 11
(1) After removing Barrel section as drawn in
Fig. 6
, disassemble Handle section as drawn in
Fig. 10
.
(2) Remove six M4x16 Pan head screws and Crank cap.
While expanding the ends of Torsion spring 7 with 1R003, remove Flat fillister head pin 6 on Link plate. (
Fig. 11
)
As for
HR4003C
,
•
the removal precess of Guard 40 can be skipped.
•
Disassemble Handle section by unscrewing
six
4x25 Tapping screws.
1. Reserve the insertion slit for a slotted screwdriver between Guard 40
and Handle base for
HR4013C
by pressing Handle section toward
Crank housing side.
And remove Guard 40 by prying it up with a slotted screwdriver.
2. Disassemble Handle section for
HR4013C
by unscrewing
eight
4x25 Tapping screws.
Guard 40
Slotted screwdriver
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Crank housing, Cylinder, Counter weight
R
epair
4x25 Tapping screw
(8 pcs.)
Torsion spring 7
1R003
Flat fillister head pin 6
Link plate
M4x16 Pan head screw (6 pcs.)
Crank cap
