background image

HR4000C

SPECIFICATIONS

Voltage(V)

No load speed

Blows per minute

Bit-type

Drilling capacities

Net weight

Cord length

Tungsten-carbitde
tipped bit

Current(A)

Cycle(Hz)

Continuous Rating(W)

Max.Output(W)

Input

Output

STANDARD EQUIPMENT

OPTINAL ACCESSORIES

FEATURES AND BENEFITS

40mm Rotary Hammer

Model HR4000C accept SDS-max shank bit and overcomes competitors'
models. 

Its brief benefits are;
*Less operator's fatigue than HILTI TE55

 less vibration and reaction toward hands
better feeling at drilling and hammering

More efficiency than HILTI TE55
Drilling       :10%up

Hammering:20%up
*Electronical speed control features

.Variable speed control
.Soft start

.Steady speed

100

120

220

230

240

11.0

9.6

5.0

4.8

4.6

50/60

50/60

50/60

50/60

50/60

1050

1050

1050

1050

1050

330

330

330

330

330

850

850

850

850

850

230     450rpm

1250     2500bpm

SDS-max shank bit  

Diameter of shank : 180 mm(11/16'') 

T.C.T. bit:40mm(1-9/16") 

 

 105 mm(4-1/8") 

Depth Gauge--------------------------------1pc.
Grease Vessel(Bit Grease)----------------1pc.
Plastic Carrying Case ---------------------1pc.
Grip 36 Ass'y-------------------------------1pc.
Side Handle Ass'y--------------------------1pc.

Tungsten-carbite tipped bit
Bit diameter : 10mm(3/8"),10.5mm(7/16"),11mm(7/16"),12mm(1/2"),12.5mm(1/2"),12.7mm(1/2"),
                       13.5mm(1/2"),14.3mm(9/16"),14.5mm(9/16"),16mm(5/8"),17mm(11/16"),17.5mm(11/16"),
                       18mm(11/16"),19mm(3/4"),20mm(13/16"),21.5mm(7/8"),22mm(7/8"),25mm(1"),
                       28mm(1-1/8"),32mm(1-1/4"),35mm(1-3/8"),38mm(1-1/2")

1.  Double insulated
2. See the sheets attached for more information.

Revolutions per minute

The standard equipment for the tools shown may differ from country to country.

Bull Point, Cold Chisel, Tile Chisel

Scaling Chisel, Clay Spade

Core Bit adapter, Grase Vessel(Hammer greese)

Models No.

Description

C

ONCEPTION AND MAIN APPLICATIONS

New Tool

T

ECHNICAL INFORMATION

455 
(17-7/8")

100 (3-15/16")

253(10")

5m(16.4ft)

6.2Kg(13.6lbs)

Core bit

Содержание HR4000C










Отзывы: