![background image](http://html2.mh-extra.com/html/makita/hm1810/hm1810_manual_4179566020.webp)
W
iring diagram
P 20/ 20
[2] Wiring in Cap Cover
Sponge sheet
1) First, if Noise suppressor is used, in order to protect lead wires, stick Sponge sheet to the surface A of Cap
cover so that the longer side of Sponge sheet contacts the surface B of Cap cover and the shorter side
contacts the surface C. (Fig. 58)
2) Then connect the lead wires as illustrated in Fig. 59.
Surface A
Surface B
Surface C
Cap cover
Connector
Noise suppressor
Crank housing cap
Handle sub base
Top cover
Sponge sheet
longer side
shorter side
Be sure to connect the lead wires
after routing through the opening of Cap cover.
After connecting the lead wires, put Connector,
Insulated connectors and the slack of lead wires
into the opening of Cap cover as illustrated
to right.
Cap cover
Field lead wires (black)
Lead wires of Pilot lamp
Lead wires of Noise suppressor (white)
(if Noise suppressor is used)
Relay wires to Switch (red)
Lead wires of Lead unit
If Noise suppressor is used, be careful not to move
Noise suppressor out of place when connecting
these lead wires with the insulated connector.
Opening of Cap cover
Fig. 58
Fig. 59
Rear case
Important