![background image](http://html1.mh-extra.com/html/makita/hm1304/hm1304_quick-manual_4163271002.webp)
2
SPECIFICATIONS
Model
HM1304
Blows per minute ........................................................................................................................................ 1,450
Overall length .......................................................................................................................................... 647 mm
Net weight ...................................................................................................................................................15 kg
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for heavy chiseling and demolition work as well as for driving and compacting with appro-
priate accessories.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and
can be operated on single-phase AC/DC supply. They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets without earth wire.
For European countries only
EC-DECLARATION OF CONFORMITY
ENH112-5-V3
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
EN60745, EN55014, EN61000
in accordance with Council Directives, 89/336/EEC, 98/
37/EC.
Measured sound power level: 100 dB
Guaranteed sound power level: 103 dB
These sound power levels are measured in accordance
with Council Directive, 2000/14/EC.
Conformity assessment procedure: Annex VI
Notified Body: BSI Product Services, Maylands Avenue,
Hemel Hempstead, Herts HP2 4SQ, England.
Vibration
The typical weighted root mean square acceleration
value is 13 m/s
2
.
These values have been obtained according to
EN60745.
Yasuhiko Kanzaki
CE 2005
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan