Makita hm1211b Скачать руководство пользователя страница 3

Страница: 3 / 20

Power tool use and care

16. Do not force the power tool. Use the correct

power tool for your application.

The correct power

tool will do the job better and safer at the rate for
which it was designed.

17. Do not use the power tool if the switch does not

turn it on and off.

Any power tool that cannot be

controlled with the switch is dangerous and must be
repaired.

18. Disconnect the plug from the power source and/

or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools.

Such preventive safety

measures reduce the risk of starting the power tool
accidentally.

19. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool.

Power tools are dangerous in the

hands of untrained users.

20. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation. If damaged, have the power tool
repaired before use.

Many accidents are caused by

poorly maintained power tools.

21. Keep cutting tools sharp and clean.

Properly

maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.

22. Use the power tool, accessories and tool bits

etc. in accordance with these instructions and in
the manner intended for the particular type of
power tool, taking into account the working con-
ditions and the work to be performed.

Use of the

power tool for operations different from those
intended could result in a hazardous situation.

Service

23. Have your power tool serviced by a qualified

repair person using only identical replacement
parts.

This will ensure that the safety of the power

tool is maintained.

24. Follow instruction for lubricating and changing

accessories.

25. Keep handles dry, clean and free from oil and

grease.

SPECIFIC SAFETY RULES

GEB004-2

DO NOT let comfort or familiarity with
product (gained from repeated use)
replace strict adherence to hammer
safety rules. If you use this tool unsafely
or incorrectly, you can suffer serious per-
sonal injury.

Wear ear protectors.

Exposure to noise can cause

hearing loss.

Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

Hold tools by insulated gripping surfaces when
performing an operation where the cutting tool
may contact hidden wiring or its own cord.

Con-

tact with a “live” wire will make exposed metal parts
of the tool “live” and shock the operator.

Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly recom-
mended that you wear a dust mask and thickly
padded gloves.

Be sure the bit is secured in place before opera-
tion.

Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.

In cold weather or when the tool has not been
used for a long time, let the tool warm up for a
while by operating it under no load. This will
loosen up the lubrication. Without proper warm-
up, hammering operation is difficult.

Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.

Hold the tool firmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

12. Do not point the tool at any one in the area when

operating. The bit could fly out and injure some-
one seriously.

13. Do not touch the bit or parts close to the bit

immediately after operation; they may be
extremely hot and could burn your skin.

14. Do not operate the tool at no-load unnecessarily.

15. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.