Makita GA4530, Инструкция по эксплуатации

Страница: 4 / 64

4
ENGLISH (Original Instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
END202-8
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.. Read instruction manual.
............. DOUBLE INSULATION
... Wear safety glasses.
............... Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
ENE048-1
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
ENF002-2
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety
Warnings
GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
GRINDER SAFETY WARNINGS
GEB033-7
Safety Warnings Common for Grinding, Sanding,
Wire Brushing, or Abrasive Cutting-Off Operations:
1. This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
2. Operations such as polishing are not
recommended to be performed with this power
tool.
Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
1. Shaft lock
2. Switch lever
3. Wheel guard
4. Screw
5. Bearing
box
6. Lever
7.
Lock nut
8. Depressed center grinding wheel/
Multi-disc
9. Inner flange
10. Lock nut wrench
11. Abrasive cut-off wheel/diamond
wheel
12. Wheel guard for abrasive cut-off
wheel/diamond wheel
13. Abrasive cut-off wheel
14. Diamond wheel
15. Thickness: Less than 4 mm
(5/32”)
16. Thickness: 4 mm (5/32”) or more
17. Exhaust vent
18. Inhalation vent
Model GA4030 GA4530 GA5030
Depressed center wheel diameter 100 mm 115 mm 125 mm
Max. wheel thickness 6.4 mm 6.4 mm 6.4 mm
Spindle thread M10
M14 or 5/8”
(country specific)
M14 or 5/8”
(country specific)
Rated speed (n)/No load speed (n
0
) 11,000 min
-1
11,000 min
-1
11,000 min
-1
Overall length 266 mm 266 mm 266 mm
Net weight 1.7 kg 1.8 kg 1.8 kg
Safety class /II