[4] DISASSEMBLY/ASSEMBLY
[4]-3. Shaft pipe complete
DISASSEMBLING
ASSEMBLING
(1) Loosen two M5x25 Hex socket head bolts and remove Clamp cover B and Loop handle. (
Fig. 7
)
(2) Remove 4x18 Tapping screws (4pcs) and M5x14 Hex socket head bolts,
then separate Lever case R and L. (
Fig. 8
)
Take the disassembling step in reverse.
Fig. 7
4x18 Tapping screw
(4pcs)
Lever case set
M5x14 Hex socket
head bolt (2pcs.)
Fig. 8
Shaft pipe
complete
M5x25 Hex. socket
head bolt (2pcs.)
Loop handle
Clamp cover B
R
epair
P
4
/ 1
4
Fig. 9
Shaft pipe
complete
Hex bolt
1R308
Cutter
assembly
Cutter holder
Head case
complete
Protector
Hex socket
head bolt
M5x25
Hex socket
head bolt
[4] DISASSEMBLY/ASSEMBLY
[4]-4. Head case complete
DISASSEMBLING
(1) Disassemble Protector and Head case complete. (
Fig. 9
)
Shaft pipe
complete
Shaft pipe
complete
(3) Disassemble Shaft pipe complete by following the disassembly step of the chapter
[4]-2
.
(4) Pull out a shaft from Shaft pipe complete.
1. Disassemble Protector by removing
Hex bolt (2pcs) and Hex socket bolt (1pc).
2. Insert 1R308 in a hole on Cutter holder to
lock shaft and remove Cutter assembly by
turning it clockwise.
3. Loosen M5x25 Hex socket head bolt
and remove Head case complete.
