Makita EB5300TH, Инструкция по эксплуатации

Страница: 21 / 24

21 ENGLISH
Interval of inspection and maintenance
- Before
operation
After
fuelling
Daily (10h) 50h 200h 600h or 2
years which-
ever earlier
Before
storage
Engine oil Inspect /
refill
- - - - - -
Replace - - -
(Note1)
- - -
Tightening
parts (bolt, nut) Inspect - - - - - -
Cooling air
inlet Clean /
inspect - - - - - -
Fuel tank Clean / inspect - - - - - -
Drain fuel - - - - - -
(Note3)
Throttle trig-
ger / throttle
lever Check
function - - - - - -
Stopping the
engine Check
function - - - - - -
Adjustment of
idling speed
Inspect /
adjust
- - - - - -
Air cleaner Clean - - - - - -
Inspect /
replace if
necessary - - - - - -
Control
cable Inspect /
adjust
- - - - - -
Inspect /
replace if
necessary - - - -
(Note2)
- -
Spark plug Inspect /
adjust gap if
necessary
- - - - - -
Clean /
replace if
necessary - - - - - -
Plug cord Inspect /
replace if
necessary - - - -
(Note2)
- -
Fuel pipe Inspect - - - - - -
Replace - - - -
(Note2)
- -
Fuel filter Clean /
replace if
necessary - - - - - -
Oil tube Inspect - - - -
(Note2)
- -
Valve clear-
ance (intake
valve and
exhaust valve) Inspect /
adjust
- - - -
(Note2)
- -
Muffler Inspect /
clean - - - -
(Note2)
- -
Combustion
chamber /
valve / port Inspect /
clean - - - -
(Note2)
- -
Engine Overhaul - - - - -
(Note2)
-
Carburetor Drain fuel - - - - - -
(Note3)
Note1: Perform initial replacement after 20h operation.
Note2: For inspection, request Authorized Service Agent or a machine shop.
Note3: After emptying the fuel tank, continue to run the engine and drain fuel in the carburetor.