Makita DVC750L, Инструкция по эксплуатации, Страница: 11 / 92

11 ENGLISH
Carriage handle
W h en c arry ing th e c leaner, c arry it by h old ing th e h and le on th e
h ead . T h e h and le is retrac table at th e h ead w h en not in use.
►
Fig.6
NOTE: W h en w ater is in th e tank, sw itc h of f th e
c leaner and empty th e tank bef ore c arry ing. T h e
w ater insid e may leak.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION:
Always wear dust mask during
assembly or maintenance.
Connecting the hose
NOTICE:
Never force the hose for bending or
stamp it. Never move the cleaner by a hose.
F orc ing, stamping and pulling th e h ose may c ause a
breakage or d ef ormation of th e h ose.
NOTICE:
Do not pick up large wastes such as
planer carvings and concrete pieces. I t may c ause
a hose stuffing and damage.
For vacuum cleaning
I nsert th e h ose into th e suc tion inlet and turn it c loc k-
w ise until it c lic ks.
► Fig.7: 1. S uc tion inlet
For blowing
I nsert th e h ose to blow er outlet and turn it c loc kw ise
until it c lic ks.
► Fig.8: 1. Blow er outlet
NOTE: T h is c leaner h as th e suc tion inlet and blow er
outlet separately . C onnec t th e h ose to th e proper port
d epend ing on y our w ork.
Connecting the nozzle
A ttac h th e w id e noz z le, sash noz z le, or oth er noz z les sup-
plied as optional ac c essories d epend ing on y our purpose.
T o attac h th e noz z le, tw ist and insert it to th e end of th e h ose.
► Fig.9
Connecting the tool
Optional accessory
T o c onnec t th e tool, c onnec t th e end of th e h ose to th e
tool' s ex trac tion outlet. D epend ing on th e tool, y ou may
need the optional joint 22-38 or the front cuff 24.
► Fig.10: 1. H ose 2. Joint 22-38 3. F ront c uf f 24
NOTE: W h en c onnec ting th e tool, alw ay s make sure th at
th e h ose is c onnec ted to th e suc tion inlet on th e c leaner.
Storage of hose and nozzles
T h e h ose and noz z les c an be stored on th e tool as
illustrated .
►
Fig.11: 1.
S ash noz z le
2.
W id e noz z le
When storing the hose, loop it on the tool and fix it with
th e h ook as illustrated .
► Fig.12: 1. H ose 2. H ook
Installing the shoulder strap
Optional accessory
A ttac h th e h ooks of th e sh ould er strap onto th e mounts
of the cleaner as shown in the figure.
►
Fig.13: 1.
S h ould er strap
2.
H ook
3.
Mount
OPERATION
Using as a vacuum cleaner
NOTICE:
Be sure to dry the HEPA lter after pick -
ing up water or wet dust. If you use the wet filter, the
suc tion pow er may be red uc ed .
1. I nstall th e h ose and noz z le onto th e suc tion inlet
and turn on th e tool.
2. A f ter v ac uum c leaning, empty th e tank bef ore it
bec omes f ull.
► Fig.14
Using as a blower
CAUTION:
Do not blow out muddy water such
as pool and sand area.
If foreign objects are blown
into eyes, it may result in personal injury.
CAUTION:
Do not operate as a blower against
the wind. If foreign objects are blown into eyes, it
may result in personal injury.
CAUTION:
Always use protective goggles, a
cap and mask while operating.
CAUTION:
Never point the nozzle at anyone
in the vicinity.
CAUTION:
The operator or user is responsi-
ble for accidents or hazards occurring to other
people or their property.
CAUTION:
Do not use the tool for blowing
air into objects, like rubber rafting, balls or other
in atable products. I nc reased motor rev olution may
c ause d angerous f an breakage.
1.
I nstall th e h ose into th e blow er outlet.
2. Point the hose tip to the object to be blown off and
turn on th e tool.
► Fig.15
NOTE: T o c lean narrow spac e, c onnec ting th e sash
noz z le to th e h ose makes it easy .