Makita DUR369LPT2, Инструкция по эксплуатации

Страница: 12 / 28

12 ENGLISH
Speed adjusting
You can select the tool speed by tapping the main
power button. Each time you tap the main power button,
the level of speed will change.
2
1
► 1. Speed indicator 2. Main power button
Speed indicator Mode Rotation speed
High 0-7,000 min
-1
Medium 0-5,500 min -1
Low 0-4,600 min
-1
Automatic Torque Drive Technology
When you turn on the Automatic Torque Drive
Technology (ADT), the tool runs at optimum rotation
speed and torque for the condition of grass being cut.
To start ADT, press and hold the reverse button until the
ADT indicator turns on. After that, tap the main power
button to select the cutting tool attached to the tool.
Light the lamp beside marking to select cutter blade
and plastic blade, marking to select nylon cutting
head.
To stop ADT, press and hold the reverse button until the
ADT indicator turns off.
5 4
1
2
3
► 1. marking 2. marking 3. ADT indicator
4. Main power button 5. Reverse button
Indicator Mode Cutting tool Rotation
speed
ADT(Cutter
blade)
Cutter blade
Plastic blade
3,500-7,000
min -1
ADT(Nylon
cutting head)
Nylon cutting
head
3,500-5,500
min
-1
Reverse button for debris removal
WARNING:
Switch off the tool and remove
the battery cartridge before you remove entan-
gled weeds or debris which the reverse rotation
function can not remove. Failure to switch off and
remove the battery cartridge may result in serious
personal injury from accidental start-up.
This tool has a reverse button to change the direction of
rotation. It is only for removing weeds and debris entan-
gled in the tool.
To reverse the rotation, tap the reverse button and pull
the switch trigger while depressing the lock-off lever
when the cutting tool is stopped. The speed indicators
and ADT indicator start blinking, and the cutting tool
rotates in reverse direction when you pull the switch
trigger.
To return to regular rotation, release the trigger and wait
until the cutting tool stops.
3
1
2
► 1. Speed indicator 2. ADT indicator 3. Reverse
button