P
4
/
1
6
Fig. 4
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Shaft pipe complete (cont.)
DISASSEMBLING
(3) Remove Handle section, and pull off Shaft pipe complete. (
Fig. 4
)
1. Remove Handle holder by unscrewing
two M5x30 Hex socket head bolts.
2. Unscrew M5x35 Pan head screw,
then pull off Handle complete
from Main grip set.
3. Unscrew five 4x18 Tapping
screws to disassemble Main
grip set.
4. Remove Main grip set (R) from
Main grip set (L).
5. Remove Cord clamp by unscrewing 4x18 Tapping
screw, separate electrical parts (Receptacles, Main
switch, Closed end splice) from Main grip set (L).
Handle holder
M5x30 Hex socket
head bolt (2 pcs.)
M5x35 Pan head screw
4x18 Tapping screw
(5 pcs.)
Main grip set
Handle complete
Main grip set (R)
Main grip set (L)
Cushion
Power supply cord unit
6. Pull out Power supply cord unit through Cushion.
7. Pull off Shaft pipe complete by removing M5x20
Hex socket head bolt and M5x16 Pan head screw.
Note
: If it is difficult to remove by hand, pull off
the pipe by gripping it with water pump pliers.
Main grip set (L)
Cord clamp
4x18
Tapping screw
Receptacles
Main Switch
M5x20 Hex socket
head bolt
M5x16 Pan head screw
Shaft pipe complete
Shaft
Rag to prevent the shaft
from damaging
Water pump pliers
