Power supply cord unit
Controller
P 1
4
/
1
6
Fig. D-2
W
iring diagram
Put Fuse here,
if it is used.
Sub Controller
Wiring in Housing (L) before setting Terminals and Adapter circuit complete
Power supply cord unit
Controller
Rib D
Cord clamp
Tube
Rib B
Rib A
Rib C
Fuse
9-Pin connector
9-Pin connector
10-Pin connector
3-Pin connector to connect
with Power supply cord unit
3-Pin connector to connect
with Power supply cord unit
3-Pin connector to connect
with Adapter circuit complete
Put Controller’s lead wires
connected to 9-Pin connector
between Rib B and Rib C.
Put the following Controller’s lead wires between Controller and Rib A.
* Lead wires to Stator
* Lead wires to Power supply cord unit
Connect 9-Pin connector of
Controller to that of Stator, then
put them on 3-Pin connector
of Power supply cord unit.
Aligning the end of Power supply cord to Rib D,
fix the cord with Cord clamp.
Note
: Be careful not to clamp Tube with Cord clamp.
