7 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DUR184L
Type of handle
Loop handle
No load speed
5,000 / 6,000 min
-1
Overall length
1,534 - 1,634 mm
Nylon cord diameter
2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
Nylon cutting head (P/N
197297-1)
300 mm
Rated voltage
D.C. 18 V
Net weight
3.3 kg
3.6 kg
Battery cartridge
BL1815N, BL1820, BL1820B
BL1830, BL1840, BL1840B,
BL1850, BL1850B, BL1860B
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
-
Sound pressure level
average
Sound power level average
Applicable standard
L
PA
(dB(A))
L
WA
(dB(A))
Uncertainty K (dB(A))
Nylon cutting head
77
89
2.0
2000/14/EC
•
Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
Vibration
-
Left hand
Right hand
Applicable standard
a
h,W
(m/s
2
)
Uncertainty K (m/s
2
)
a
h,W
(m/s
2
)
Uncertainty K (m/s
2
)
Nylon cutting head
2.5
1.5
2.5
1.5
EN50636-2-91
NOTE:
The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE:
The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the tool and
bystanders must be at least 15 m.
360°
Keep bystanders away.
15m(50
FT
)
Keep distance at least 15 m.
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Содержание DUR184LRT
