DISASSEMBLING
(1) Separate Pipe complete/ Pipe B from Housing set L as drawn in
Fig. 6
.
1. After removing Housing set R from Housing set L,
disconnect 5 pin connector and 3 pin connector.
Then, cut three Closed end splices at the points
designated with black dotted lines below.
2. Unscrew 4x18 Tapping screws.
Pipe complete and Power supply cord unit
are separated from Housing set.
3. Pipe B for DUR183L, do the following steps.
•
Loosen M6x12 Hex socket head bolt and then remove Joint 24.
• Remove Power supply cord unit from
Pipe B.
Closed end splice
5 pin
connector
3 pin
connector
Clamp 24
Pipe complete / Pipe B
Housing set L
4x18 Tapping screw
4x18 Tapping screw
M6x12 Hex socket head bolt
Joint 24
Strain relief
Power supply cord unit
to Main grip set
Fig. 6
R
epair
P
5
/ 1
3
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Pipe complete / Pipe B [Housing set side]
Power supply cord unit
Pipe B
