W
iring diaphragm
P 1
2
/ 1
3
Wiring in Grip set
Reverse
switch
Pile three lead wires with this Lead wire holder A,
then put the upper (yellow) in between Lead wire holder D,
put the middle (black) in between Lead wire holder C,
put the lower (while) in between Lead wire holder B.
Ribs to form
Lead wire holders
Four ribs to hold Lead wires
Lead wire (white)
Lead wire (black)
Lead wire (yellow)
Put Reverse switch to Handle set
while facing Wire connected side of
Receptacles to ON-OFF switch side.
Trigger switch
Closed end splice (2 pcs.)
Place the slacks of Lead wires
around Closed end splices
in the space here.
Wire connected side
of Receptacle
Receptacle
(with Sleeve)
Note
: Be careful not
to pinch Tube
with Strain relief.
Fig. D-4
Put Lead wires into the groove
of Grip L
Tube
Power supply cord unit
Wire connected side
of Receptacle
Receptacle
Lead wire
holder B
Lead wire
holder C
Lead wire holder A
Lead wire
holder D
