![background image](http://html1.mh-extra.com/html/makita/duh651/duh651_instruction-manual_4143032009.webp)
9 ENGLISH
1
2
►
1.
Nut
2.
Branch catcher
At this time, the chip receiver needs to be installed so
that its hooks fit into grooves in the shear blade unit.
1
2
3
►
1.
Hooks
2.
Fit the hooks into groove
3.
Grooves
To remove the chip receiver, press its lever on both
sides so that the hooks are unlocked.
1
2
►
1.
Press the levers on both sides
2.
Unlock the
hooks
CAUTION:
•
The blade cover cannot be installed on the tool
with the chip receiver being installed. Before
carrying or storing, uninstall the chip receiver
and then install the blade cover to avoid blade
exposure.
NOTE:
•
Check the chip receiver for secure installment
before use.
•
Never try to uninstall the chip receiver by an
excessive force with its hooks locked in the
blade unit grooves. Using the excessive force
may damage it.
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and
the battery cartridge is removed before attempt-
ing to perform inspection or maintenance.
•
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Cleaning the tool
Clean out the tool by wiping off dust with a dry or soap-
dipped rag.
Blade maintenance
Smear the blade before and once per hour during oper-
ation using machine oil or similars.
NOTE:
•
Before smearing the blade, remove the chip
receiver.
After operation, remove dust from both sides of the
blade with wired brush, wipe it off with a rag and then
apply enough low-viscosity oil, such as machine oil etc.
and spray-type lubricating oil.
CAUTION:
•
Do not wash the blades in water. Failure to do
so may cause rust or damage on the tool.
Removing or installing shear blade
CAUTION:
•
Before removing or installing shear blade,
always be sure that the tool is switched off and
the battery cartridge is removed.
•
When replacing the shear blade, always wear
gloves without removing blade cover so that
hands and face does not directly contact the
blade. Failure to do so may cause personal
injury.
NOTE:
•
Do not wipe off grease from the gear and crank.
Failure to do so may cause damage to the tool.
•
For specific way of removing and installing
shear blades refer to the reverse of a package
for accessory shear blades.