Makita DUH507SF, Инструкция по эксплуатации

Страница: 9 / 16

9 ENGLISH
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION:
When replacing the shear blades,
always wear gloves so that your hands do not
directly contact the shear blades.
NOTICE:
When replacing the shear blades, do
not wipe off grease from the gear.
Installing or removing the shear
blades
CAUTION:
Attach the blade cover before
removing or installing the shear blades.
You can install 500 mm or 600 mm shear blades to your
tool.
1. Attach the blade cover to the shear blades.
1
Fig.5
►
1. Blade cover
2. Place the tool upside down.
Remove 6 screws, and then remove the cover.
1
2
Fig.6
►
1. Screw 2. Cover
3. Remove the bolts and the shear blades from the
tool. Then remove the dust guard, the metal sleeves
and the flat washer from the shear blades.
3
1
2
4
5
Fig.7
►
1. Bolt 2. Shear blades 3. Dust guard 4. Metal
sleeve 5. Flat washer
NOTICE:
Be careful not to lose the bolts, the
dust guard, the metal sleeves, and the flat washer.
These parts are needed again when installing new
shear blades.
4. Check if the resin sleeve remains on the machine,
and if so, remove the resin sleeve.
1
Fig.8
►
1. Resin sleeve
NOTE: Old resin sleeves are not need to be stored.
The new shear blades include the new resin sleeves.