Makita DUC256, Руководство по ремонту, Страница: 5 / 32

5 / 32
6 REPAIR
6-1 Saw chain
6-1-1 Disassembling
Fig. 2
1
Remove Batteries [1] (2 pcs).
2
Loosen Flange nut complete [2], then remove
Sprocket cover ass’y [3].
Fig. 3
3
Lift up Saw chain section [1] and remove it.
Note

Disassemble the machine after cleaning wood dust
etc. with a brush and an air duster.

Guide bar in all photos is not the actual one.
However, the removing/ assembling way is the
same.
6-1-2 Assembling
Fig. 4
1
Remove Guide bar case, then fit Saw chain [3] to
the grooves of Guide bar [1] and Sprocket 6 [2]
with care of the orientation in accordance with the
picture shown on Sprocket cover.
Tips

Pick up the top side of Guide bar [1] and swing the
rear side. Saw chain [3] can be fit into the groove of
Guide bar [1].

Adjust Drive gear [5] to put the hook of Tension
slide [4] into the lower hole of Guide bar [1].
[1]
[3]
[2]
[3]
[1]
[4]
[5]
[1]
[1]
[3]
[2]
[1]
[3]
[2]
[1]