Makita DUC256, Руководство по ремонту, Страница: 3 / 32

3 / 32
2 CAUTION
Repair the machine in accordance with "Instruction manual" or "Safety instructions".
Follow the instructions described below in advance before repairing:

Wear gloves.

In order to avoid wrong reassembly, draw or write down where and how the parts are assembled, and what the parts are.
It is also recommended to have boxes ready to keep disassembled parts by group.

Handle the disassembled parts carefully. Clean and wash them properly.

Remove Batteries, except when they are necessary to check the operation of the machine.
3 NECESSARY REPAIRING TOOLS
Code No. Description Use for
1R003 Retaining ring pliers ST-2N assembling Compression spring 7
1R026 Pipe 8-16-50 press-fitting Ball bearing 696ZZ
1R030 Pipe 17-25-50 press-fitting Ball bearing 6000DDW
1R033 Ring 10-60-15 press-fitting Ball bearing 696ZZ
1R242 Round bar 13-100 removing Ball bearing 6000DDW
1R269 Bearing puller small removing Ball bearing 696ZZ
1R311 Retaining ring pliers L removing/ assembling Retaining ring R-26
1R411 Push bar for lead wires fixing Lead wires
4 LUBRICANT AND ADHESIVE APPLICATION
Description Amount
Makita grease FA No.2 Apply a little unless specified in the figure.
Loctite 243 or ThreeBond 1342 (H)
Fig. 1