![background image](http://html1.mh-extra.com/html/makita/dtw1001xv/dtw1001xv_instruction-manual_4262935008.webp)
8 ENGLISH
Changing the impact force
►
Fig.8:
1.
Changed in three steps
2.
Hard
3.
Medium
4.
Soft
5.
Button
You can change the impact in three steps: hard, medium and soft mode.
This allows a tightening suitable to the work.
Every time the button
is pressed, the number of blows changes in three steps.
For approximately one minute after releasing the switch trigger, the impact force can be changed.
Specifications of each impact force grade
Impact force grade displayed on
panel
Maximum blows
Application
DTW1001 /
DTW1001XV
DTW1002 /
DTW1002XV
DTW800 /
DTW800XV
Hard
2,200 min
-1
(/min)
Tightening when force and speed are desired.
Medium
2,000 min
-1
(/min)
Tightening when you need good controlled power.
Soft
1,800 min
-1
(/min)
Tightening when you need fine adjustment with
small diameter bolt.
Impact force/bolt size corresponding chart (reference)
Impact force grade displayed on
panel
DTW1001 / DTW1001XV
DTW1002 / DTW1002XV
DTW800 / DTW800XV
Standard bolt High tensile
bolt
Standard bolt High tensile
bolt
Standard bolt High tensile
bolt
Hard
M20 - M30
(3/4″ - 1-1/4″)
M16 - M24
(5/8″ - 1″)
M20 - M30
(3/4″ - 1-1/4″)
M16 - M24
(5/8″ - 1″)
M20 - M24
(3/4″ - 1″)
M16 - M22
(5/8″ - 7/8″)
Medium
M16 - M24
(5/8″ - 1″)
M12 - M20
(1/2″ - 3/4″)
M16 - M24
(5/8″ - 1″)
M12 - M20
(1/2″ - 3/4″)
M14 - M20
(9/16″ - 3/4″)
M10 - M16
(3/8″ - 5/8″)
Soft
M12 - M20
(1/2″ - 3/4″)
M10 - M16
(3/8″ - 5/8″)
M12 - M20
(1/2″ - 3/4″)
M10 - M16
(3/8″ - 5/8″)
M12 - M16
(1/2″ - 5/8″)
M10 - M12
(3/8″ - 1/2″)
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Selecting correct impact socket
Always use the correct size impact socket for bolts and
nuts. An incorrect size impact socket will result in inac-
curate and inconsistent fastening torque and/or damage
to the bolt or nut.
Installing or removing impact socket
Only for Model DTW1001 / DTW1002 / DTW1001XV /
DTW1002XV (optional accessory)
CAUTION:
Make sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
For impact socket without O-ring and pin
►
Fig.9:
1.
Impact socket
2.
Square drive
Align the square of the impact socket with the square
drive and push the impact socket onto the square drive
until it locks into place. Tap it lightly if required.
Содержание DTW1001XV
Страница 2: ...1 2 3 Fig 1 1 Fig 2 1 2 Fig 3 1 Fig 4 1 Fig 5 1 Fig 6 A B 1 Fig 7 1 2 3 4 5 Fig 8 2 ...
Страница 3: ...1 2 Fig 9 2 3 1 Fig 10 A Fig 11 1 2 Fig 12 2 1 3 Fig 13 1 2 3 Fig 14 Fig 15 3 ...
Страница 94: ...94 ...
Страница 95: ...95 ...