![background image](http://html.mh-extra.com/html/makita/dtm41/dtm41_instruction-manual_230461004.webp)
4
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model DTM41
Work mode : sanding
Vibration emission (a
h
) : 3.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DTM51
Work mode : sanding
Vibration emission (a
h
) : 3.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DTM41
Work mode : cutting with plunge cut saw blade
Vibration emission (a
h
) : 7.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DTM51
Work mode : cutting with plunge cut saw blade
Vibration emission (a
h
) : 7.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DTM41
Work mode : cutting with segment saw blade
Vibration emission (a
h
) : 4.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DTM51
Work mode : cutting with segment saw blade
Vibration emission (a
h
) : 4.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DTM41
Work mode : scraping
Vibration emission (a
h
) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DTM51
Work mode : scraping
Vibration emission (a
h
) : 5.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Multi Tool
Model No./ Type: DTM41, DTM51
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
Standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
18.7.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA010-1
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.