7
Adjusting the angle head
The angle head can be adjusted 360° (8 positions in
45-degree increments). To adjust it, loosen the hex bolt
and remove the angle head.
Adjust the angle head to the desired position and reinstall
it so that the teeth on the housing will match up with the
grooves in the angle head. Then tighten the hex bolt to
secure the angle head.
1
2
008335
1
2
008336
Straight head and ratchet head (Accessory)
Straight heads and ratchet heads are available as
optional accessories for various applications on the job.
1
002828
1
002829
OPERATION
CAUTION:
•
Always insert the battery cartridge all the way until it
locks in place. If you can see the red part on the
upper side of the button, it is not locked completely.
Insert it fully until the red part cannot be seen. If not,
it may accidentally fall out of the tool, causing injury
to you or someone around you.
Hold the tool firmly and place the socket over the bolt or
nut. Turn the tool on and fasten for the proper fastening
time.
008497
The proper fastening torque may differ depending upon
the kind or size of the bolt, the material of the workpiece
to be fastened, etc. The relation between fastening
torque and fastening time is shown in the figures.
50
40
30
20
10
0
0
1
2
3
M12(1/2")
(M12(1/2"))
M10(3/8")
(M10(3/8"))
M8(5/16")
(M8(5/16"))
(29)
(15)
(36)
(22)
(8)
Standard bolt
N m
Fastening torque
Fastening time
Proper fastening torque
(ft lbs)
(S)
008501
1. Ratchet head
1. Straight head
1. Groove
2. Tooth
1. Hex bolt
2. Angle head
