Makita DTD152, Техническая информация

Страница: 13 / 27

July 2015
4. Insert the drive end of Armature (30) into Bearing box
complete (28) while engaging the drive end of Armature
(30) with Spur gears in Hammer case section (8-28) to
rotate them smoothly.
Figure 22
5. Assemble Brush holder complete (32) to the drive end of
Armature (30).
Note:
(1) When assembling Brush holder complete (32) to the
drive end of Armature (30), Carbon brush (31) must not
be locked with the pressure of Torsion spring.
(See
Figure 17
)
(2) When assembling a new Brush holder complete, see
6. Assembly of Brush holder complete to Armature
.
Figure 23
Drive end of Armature (30)
(8-28)
Drive end of Armature (30)
(28)
(32)
13 / 27