6
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
•
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges and chargers may
cause injury and/or fire.
Intended use
ENE028-1
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece.
General power tool safety
warnings
GEA010-2
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless circular saw safety
warnings
GEB151-2
Cutting procedures
1.
DANGER: Keep hands away from cutting area
and the blade. Keep your second hand on
auxiliary handle, or motor housing.
If both hands
are holding the saw, they cannot be cut by the blade.
1.
Red indicator
2.
Button
3.
Battery cartridge
4.
Indicator lamps
5.
Check button
6.
Lever
7.
Stopper
8.
Base
9.
Cutting line
10. Switch trigger
11. Lock-off lever
12. Shaft lock
13. Hex wrench
14. Tighten
15. Loosen
16. Inner flange
17. Circular saw blade
18. Outer flange
19. Hex bolt
20. Arrow on the tool
21. Arrow on the circular saw blade
22. Ring
23. Dust nozzle
24. Screw
25. Hose
26. Vacuum cleaner
27. Rear handle
28. Front grip
29. Clamping screw
30. Rip fence (Guide rule)
31. Adjusting screw for 45° (DSS610
only)
32. Adjusting screw for 90°
33. Triangular rule
34. Limit mark
35. Brush holder cap
36. Screwdriver
Model
DSS610
DSS611
Blade diameter
165 mm
Max. Cutting depth
at 90°
57 mm
at 45°
40 mm
at 50°
36 mm
No load speed (min
-1
)
3,700
Overall length
347 mm
Net weight
3.0 - 3.4 kg
2.9 - 3.2 kg
Rated voltage
D.C. 18V
Battery cartridge
BL1815N/BL1820B/BL1830B/BL1840B/BL1850B/BL1860B
Charger
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF/DC18SH/DC18WC