Makita DMR116, Инструкция по эксплуатации

Страница: 9 / 77

9 ENGLISH
3. While the radio alarm symbol is flashing, press
button for more than 2 seconds until you hear a beep.
4. Display Hour will flash, rotate Tuning/Volume control
knob to select the hour then press button again to
confirm hour setting.
5. Follow same procedures of setting hour to set required
minute. Press button to complete alarm time
setting.
b. Setting radio alarmed station:
1. During setting radio alarm time and radio alarm symbol
is flashing, press Band button to activate the radio to
select required wake-up band and station by manual
tuning and recall the preset stations. Press
button to complete radio alarm setting. Display will
show
.
2. When above radio alarm time and station are set,
press and hold down radio alarm button for 2
seconds followed by a beep to switch alarm on or off.
Display will show
when radio alarm is set.
Note:
If new radio alarm station is not selected, it will select
the last alarm station.
Setting the HWS (Humane Wake
System) buzzer alarm
A beep tone will activate when selecting the HWS buzzer
alarm.
The alarm beep will become shorter every 15 seconds
for one minute followed by one minute silence before
repeating the cycle.
The HWS alarm will sound for one hour until turning off by
pressing the Power button. Press the Power button whilst
the alarm is activated will cancel the alarm for 24 hours.
1. The HWS buzzer alarm can be set either radio is on or
off.
2. Press and release the HWS buzzer alarm button
, the symbol will flash.
3. During the symbol flashes, long pressing the
button for more than 2 seconds followed by a beep and
display Hour digit will flash.
4. Rotate Tuning/Volume control knob to select required
alarm hour, then press time set button again. The
minute digit will then flash.
5. Rotate Tuning/Volume control knob to select required
alarm minute, the press time set button again to
complete HWS buzzer alarm setting.
6. Press and hold down buzzer alarm button for
more than 2 seconds followed by a beep to switch on
or off the HWS buzzer alarm. Display will appear
when buzzer alarm has been set.
Snooze function
1. Whilst the alarm is activated, pressing any buttons
except the Power button will activate the snooze
function. The radio or HWS buzzer alarm will be
silenced with interval of 5 minutes.
2. The display will flash both the snooze symbol
and the alarm symbol. The snooze function can be
repeatedly during one hour that the alarms are active.
Sleep function
The sleep timer will automatically switch off the radio after
a preset time has elapsed.
1. Press and continue to hold down the Power button for
more than 2 seconds, followed by a beep tone, the
display will cycle through the available sleep times in
the order 60-45-30-15-120-90-60.
Release the Power button when the required sleep time
appears in the display. The symbol
will appear in the
display and the radio will play the last station selected.
2. To cancel the sleep function, press the Power button.
The Symbol will disappear and radio is off.
Display illumination
Press any buttons or rotate Tuning/Volume control knob
will illuminate the LCD display for approx. 15 seconds.
During scanning stations and alarm activated, will also
automatically illuminate the display.
Change Stereo to Mono
When the stereo FM station reception is weak, you
can improve it by pressing Mono button for 2 seconds.
The sound is no longer in stereo and stereo indicator
disappears.
AUXILIARY INPUT SOCKET
A 3.5mm Auxiliary input socket is provided at the front
of your radio to permit an audio signal to be fed into the
unit from an external audio device such as a MP3 or CD
player.
1. Connect an external audio source (for example, MP3
or CD player) to the AUX IN socket.
2. Press the Power button to switch on your radio.
3. Repeatedly press and release the Band button until
“AU1” is displayed.
4. To have the better sound quality, we recommend
setting the volume to more than two-thirds level on your
audio device and then adjust the volume on the radio
as required.
Note:
Audio cord is not included as standard accessories. AUX
can’t be activated as alarm source.
MAINTENANCE
CAUTION:
● Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.