6 ENGLISH
ASSEMBLY
WARNING:
Always be sure that the lock key
and battery cartridge are removed before carrying
out any work on the mower.
Failure to remove the
lock key and the battery cartridge may result in seri
-
ous personal injury from accidental start-up.
WARNING:
Never start the mower unless it is
completely assembled.
Operation of the tools in a
partially assembled state may result in serious per
-
sonal injury from accidental start-up.
Installing the handle
NOTICE:
When installing handles, position the
cords so that they are not caught by anything
between the handles. If the cord is damaged, the
mower switch may not work.
1.
Attach the lower handle so that the holes in the
handle fit in the protrusions on the mower body. Insert
the bolts from inside, then attach washer A from outside,
and then tighten the thumb nuts.
1
2
3
6
5
4
►
1.
Lower handle
2.
Washer A
3.
Thumb nut
4.
Protrusion
5.
Hole
6.
Bolt
2.
Align the hole in the lower handle with the hole
in the upper handle, then insert the bolts from inside,
then attach washer B from outside, and then tighten the
thumb nuts.
1
2
3
6
4
5
►
1.
Upper handle
2.
Hole
3.
Washer B
4.
Thumb nut
5.
Lower handle
6.
Bolt
CAUTION:
Hold the upper handle firmly so
that it does not drop off your hand.
Otherwise, the
handle may fall and cause an injury.
3.
Attach holder A and holder B to the handle.
Position the cords as shown in the figure.
1
2
3
►
1.
Cord
2.
Holder A
3.
Holder B
NOTE:
When attaching holder A, be sure to fix the
cord with the holder as shown in the figure.
Содержание DLM460PG2
Страница 1: ...INSTRUCTION MANUAL Cordless Lawn Mower DLM460 DLM461 ENGLISH Original instructions Read before use ...
Страница 18: ...18 ...
Страница 19: ...19 ...
