4-5
Connecting rod, Front shaft, Rear shaft
4-5-1
Disassembling
[1] Remove the assembled part of Lower pipe and Upper pipe complete. (4-1-1 Disassembling)
[2] Remove Cowling. (4-2-1 Disassembling)
[3] Remove the assembled part of Change lever and Adjust plate. (4-3-1 Disassembling)
[4] Remove Front wheel and Rear wheel. (4-4-1 Disassembling)
Fig. 4-5-1-1
[5] Loosen two 4x18 Tapping screws, and remove Protective shield. (For Canada only)
Fig. 4-5-1-2
[6] Loosen two M5-8 Hex lock nuts and two Flat washers 5, and remove Connecting rod.
4x18 Tapping screw
(2 pcs.)
Protective shield
Connecting rod
M5-8 Hex lock nut
(2 pcs.) and
two Flat washer 5 (2 pcs.)
13 / 21
