4-3
Change lever, Adjust plate
4-3-1
Disassembling
[1] Remove Cowling. (4-2-1 Disassembling)
Fig. 4-3-1-2
[4] Put a wood under Deck to raise Wheels from the
ground.
Fig. 4-3-1-3
[5] Loosen two 4x18 Tapping screws, and remove the
assembled part of Adjust plate and Change lever toward
DC motor side from Connecting rod.
Wood
Adjust plate
Connecting rod
Change lever
4x18 Tapping
screw (2 pcs.)
DC motor side
Fig. 4-3-1-4
[6] The components of Change lever and Adjust plate are as follows:
Change lever cover
Compression
spring 9
Flat washer 9
Flat washer 4
4x18 Tapping
screw
Change lever
M6x30 Hex
bolt
Sleeve 6
Adjust plate
M6 Hex nut
4x18 Tapping
screw (2 pcs.)
Fig. 4-3-1-1
[2] Shift Change lever to the position of Cutting height at 75mm.
[3] Release Tension spring 16 from the hook with long nose pliers.
Hook
Tension spring 16
Long nose pliers
Change lever
9 / 21
