Makita DHS630Z, Инструкция по эксплуатации

Страница: 6 / 40

6
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Symbols
END004-6
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
Intended use
ENE028-1
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece.
GENERAL POWER TOOL SAFETY
WARNINGS
GEA013-2
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Indicator lamps
6. Check button
7. Lever
8. Wing screw
9. Cutting line
10. 45° position
11. 0° position
12. Screw
13. Top guide
14. Switch trigger
15. Lock-off lever
16. Light
17. Shaft lock
18. Hex wrench
19. Loosen
20. Hex bolt
21. Outer flange
22. Saw blade
23. Inner flange
24. Dust nozzle 25. Thumb screw
26. Hose
27. Vacuum cleaner
28. Clamp lever
29. Rip fence (Guide rule)
30. Adjusting screw
31. Triangular rule
32. Base
33. Limit mark
34. Brush holder cap
35. Screwdriver
Model DHS630
Blade diameter 165 mm
Max. Cutting depth
at 90° 66 mm
at 45° 46 mm
No load speed (min
-1
) 3,100
Overall length 346 mm
Net weight 3.0 - 3.4 kg
Rated voltage D.C. 18V
Battery cartridge
BL1815N/BL1820/BL1820B/BL1830/BL1830B/BL1840/BL1840B/BL1850/
BL1850B/BL1860B
Charger DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF