6 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DFR452
DFR453
DFR551
DFR552
Screw strip
ø3.5 mm x 20 mm - ø4.2 mm x
41 mm
ø3.5 mm x 25 mm - ø4.2 mm x
55 mm
No load speed
0 - 6,000 min
-1
0 - 4,500 min
-1
0 - 6,000 min
-1
0 - 4,500 min
-1
Overall length
360 mm
396 mm
Rated voltage
D.C. 18 V
Net weight
1.9 - 2.2 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841-2-2:
Model
Sound pressure
level (L
pA
) : (dB(A))
Uncertainty (K) :
(dB(A))
DFR452
78
3
DFR453
79
3
DFR551
77
3
DFR552
78
3
The noise level under working may exceed 80 dB (A).
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter
-
mined according to EN62841-2-2:
Work mode: screwdriving without impact
Model
Vibration emis-
sion (a
h
) : (m/s
2
)
Uncertainty (K) :
(m/s
2
)
DFR452
2.5 m/s
2
or less
1.5 m/s
2
DFR453
DFR551
DFR552
NOTE:
The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
Содержание DFR453
