26
6
7
8
9
10
No
11 CYLINDER / PISTON
Removing the cylinder and piston
Disconnect the intake and exhaust sides.
Unscrew the spark plug.
Unscrew 4 screws
6
and pull the cylinder up
and off.
Note:
After pulling off the cylinder, support the
piston with the assembly tool (944.600.001).
Note:
, The cylinder comes without thread as a
spare part, because the muffler screws are
self forming screws
Remove spring ring
7
with needle-nose pliers.
Assembling the cylinder and piston
Use a new gasket!
Before assembly, lightly oil the cylinder
race and piston!
Push the assembly tool
9
under the piston.
Position the opening on the piston ring
towards the piston ring lock.
Use the piston ring tensioner
10
to press the
piston ring together.
Push the cylinder onto the piston. Let the
piston ring tensioner slide down with it.
Remove the assembly tool and piston ring
tensioner and press the cylinder all the way
down.
Hand-tighten the screws
6
lightly crosswise,
and then tighten to the correct torque, again
crosswise.
Содержание DCS460
Страница 1: ...REPAIR MANUAL DCS460 DCS510 DCS5121 EA5000P53G PS 460 PS 510 PS 5105...
Страница 32: ...32 Form 995 726 620 620...
