P 7/ 24
R
epair
[4] DISASSEMBLY/ ASSEMBLY
[4]-1. Magazine section (cont.)
DISASSEMBLING
ASSEMBLING
Fig. 17
1. Push out Pin 3 with 1R268 and a metal hammer.
Note
: Leave 4mm height between the angle of the side hook of
Pusher and the bottom of each Sleeve. If the bottom of Sleeve
is attached to the angle of the side hook by inserting completely,
the center hook would be bumped against Slide door.
Note
: Stopper is directional, and therefore,
it must be assembled to Pusher as
drawn below.
2. Disassemble Lock lever section.
(3) Remove Lock lever from Slide door. (
Fig. 5
)
Assemble the components by reversing the disassembly procedure. See
Figs. 6 and 7
for the assembly of Pusher section.
Fig. 6
Fig. 7
Fig. 5
1R268
Slide door
Lock lever
Metal hammer
Pin 3
Lock lever
Urethane ring 3
Compression
spring 7
4mm
Side hooks
of Pusher
Center hook of
Pusher
Compression spring 4
Pusher
Slots of Sleeves
Sleeves
Stopper
