P
3
/
6
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. DC Motor
DISASSEMBLING
(1) Remove Fan housing L, Fan AP-10302 and Fan housing R. (Refer to
Figs. 1
and
2
)
(2) DC motor can be disassembled from Motor housing set. (
Figs. 3
and
4
)
Tap the edge of Motor housing set with Plastic hammer.
DC motor with Rubber rings A and B comes out.
Motor rubber ring B
Motor rubber ring A
DC motor
It is difficult to pull off Receptacles from DC motor
by hand because of their tight connecting.
In this case, remove each Receptacle by levering up
with slotted screwdriver while supporting Receptacle
as drawn right.
Receptacle
Index finger
Slotted
screwdriver
Fig. 3
Motor rubber ring B
groove
plus terminal
groove
Motor rubber rings A and B can be removed from DC motor as drawn below after disconnecting Receptacles.
Motor rubber ring A
DC motor
Fig. 4