![background image](http://html.mh-extra.com/html/makita/bss730/bss730_instruction-manual_230311013.webp)
13
Adjusting depth of cut
CAUTION:
•
After adjusting the depth of cut, always tighten the lever
securely.
Loosen the lever on the side of the rear handle and move the
base up or down. At the desired depth of cut, secure the
base by tightening the lever.
For cleaner, safer cuts, set cut depth so that no more than
one blade tooth projects below workpiece. Using proper cut
depth helps to reduce potential for dangerous KICKBACKS
which can cause personal injury.
Bevel cutting
Loosen the clamping screws in front and back. Set for the
desired angle (0° - 50°) by tilting accordingly, then tighten the
clamping screws securely. Use the 45° stopper when you do
precise 45° angle cutting. Turn the lever clockwise fully for
bevel cut (0° - 45°) and turn it counterclockwise for 0° - 50°
bevel cuts.
Sighting
For straight cuts, align the A position on the front of the base
with your cutting line. For 45° bevel cuts, align the B position
with it.
1. Lever
1
001354
1. Clamping screw
1. Stopper
1
001370
1
0 - 45
°
0 - 50
°
001371
1. Base
2. Cutting line
1
B
2
A
001389
Содержание BSS730
Страница 19: ...Memo 19 ...
Страница 20: ...Memo 20 ...
Страница 21: ...21 Fold Cut Stamp Timbre Makita Canada Inc 1950 Forbes Street Whitby Ontario L1N 7B7 ...