![background image](http://html.mh-extra.com/html/makita/bss500/bss500_instruction-manual_223484004.webp)
4
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Lever
3-1. Lever
4-1. Base
4-2. Cutting line
5-1. Lock-off lever
5-2. Switch trigger
6-1. Shaft lock
7-1. Hex wrench
8-1. Hex bolt
8-2. Outer flange
8-3. Saw blade
8-4. Inner flange
9-1. Hex wrench
10-1. Dust nozzle
10-2. Screw
11-1. Dust nozzle
11-2. Hose
11-3. Vacuum cleaner
14-1. Adjusting screw for 90
゚
15-1. Triangular rule
16-1. Limit mark
17-1. Brush holder cap
17-2. Screwdriver
SPECIFICATIONS
Model BSS500
BSS501
Blade diameter
136 mm
at 90°
51 mm
Max. Cutting depth
at 45°
35 mm
No load speed (min
-1
) 3,600
Overall length
359 mm
364 mm
Net weight
2.6 kg
2.7 kg
Rated voltage
D.C. 14.4V
D.C. 18V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE028-1
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model BSS500
Sound pressure level (L
pA
) : 75 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BSS501
Sound pressure level (L
pA
) : 76 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
h,W
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-16
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Circular Saw
Model No./ Type: BSS500, BSS501
are of series production and
Содержание BSS500
Страница 3: ...3 13 007980 1 14 007981 1 15 007982 1 16 001145 1 2 17 007983 ...
Страница 67: ...67 ...
Страница 68: ...68 Makita Corporation Anjo Aichi Japan www makita com 884706C979 ...