13 ENGLISH
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and
the battery cartridge is removed before carrying
out any work on the tool.
•
Clean out the upper and lower guards to
ensure there is no accumulated sawdust
which may impede the operation of the lower
guarding system.
A dirty guarding system may
limit the proper operation which could result in
serious personal injury. The most effective way
to accomplish this cleaning is with compressed
air.
If the dust is being blown out of the
guards be sure the proper eye and breathing
protection is used.
•
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Adjusting for accuracy of 0° and 45°
cut (vertical and 45° cut)
►
Fig.28:
1.
Adjusting screw for 45°
2.
Adjusting
screw for 0°
►
Fig.29:
1.
Triangular rule
This adjustment has been made at the factory. But if
it is off, adjust the adjusting screws with a hex wrench
while inspecting 0° or 45° the blade with the base using
a triangular rule or square rule, etc. Use the 45° stopper
for adjusting 45° angle.
Adjusting bevel guide
►
Fig.30:
1.
Bevel guide
2.
Screw
3.
Guide
The bevel guide has been factory adjusted. But if it is
off, you can adjust it as the following procedure.
To adjust the bevel guide, loosen the two screws. Align
the 0° line on the bevel guide with the guide on the base
when the base is set to 0° angle.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per
-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
•
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
Saw blades
•
Rip fence (Guide rule)
•
Guide rail
•
Guide rail adapter
•
Rule bar
•
Dust nozzle
•
Hex wrench
•
Makita genuine battery and charger
NOTE:
•
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
Содержание BL1830B
Страница 2: ...1 2 3 1 2 Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 Fig 7 Fig 8 2 ...
Страница 3: ...1 2 1 1 4 1 2 1 1 0 45 0 50 3 1 2 1 Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 Fig 14 Fig 15 Fig 16 3 ...
Страница 5: ...1 2 1 2 1 2 1 0 45 1 2 3 Fig 25 Fig 26 Fig 27 Fig 28 Fig 29 Fig 30 5 ...
Страница 75: ...75 ...
