M6x8 Hex socket head
set screw
Fig. 2
Fig. 3
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Base
DISASSEMBLING
M6x6 Hex socket head set Screw
1. Remove M6x20 Thumb screw, Spring washer 6,
and Flat washer 6 from Angular guide side and
Depth guide side.
2. Remove M6x6 Hex Socket Head Set Screw
from Angular guide side and Depth guide side.
M6x20 Thumb
screw
Shoulder pin 6-7
Base
Remove the parts drawn below from Base.
And then, replace the Base with the new one.
Do not forget to remove M6x8 Hex socket head set screw for
adjusting the angle of saw blade from the reverse side of Base.
Base
Note in Assembling
1. After mounting Lock lever, its adjustment is required to obtain the correct lock position for guide rule, mounted.
to Base. See “
[3]-2. Lock Lever
” .
2. After mounting Base to the machine, adjustment of angle of saw blade to the Base is required.
See “
[4]
Adjustment”
Take the reverse step of Disassembling. Refer to
Fig. 3
,
Fig. 2
.
Base can be separated from the machine as drawn in
Figs. 2
and
3
.
3. Remove Shoulder pin 6-7.
Now Base complete is separated
from the machine.
Spring
washer 6
Flat
washer 6
Lock lever
Torsion
spring 11
Torsion spring 11
Lock lever
Spring
washer 6
Flat
washer 6
M6x20 Thumb
screw
M4x8 Pan head screw
Top guide
ASSEMBLING
R
epair
P
3
/ 1
6
