Fig. D-2
to ON/OFF Switch in Handle
Opening for Lead wires
Opening for Lead wire
Lead wire holder
Lead wire holder
Put Lead wires for
connecting to Connector
inside the Rib.
Brush holder
Brush holder
Fix Lead wires (black), (white) of Brush holders in
Lead wire holder here so as not to make any slacks
between Opening and the lead holder.
Fix Brush holder’s Lead wires
in Lead wire holders.
Pass the Lead wires through the opening
to Blade case side.
Lead wire
holder
Wiring of Brush holder’s Lead wires
Wiring in Handle
Fig. D-3
Fix the following Lead wires in these Lead wire holders.
* Lead wre (white) between ON/OFF switch and Switch unit of LED
* Lead wire (black) between Controller and Connector
Connector
See
Fig. D-4
in
the next page.
W
iring diagram
P 1
5
/ 1
6
