P
10
/
1
4
ASSEMBLING
Gear section
Switch unit
Housing (R)
Motor section
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Motor and Gear Section (cont.)
3) Assemble Motor section. (
Fig. 22
)
Assemble Motor section and Gear section together while
turning Motor bracket in the direction of the arrow.
Then install Switch unit on Gear case, and connect Lead
wires of Endbell complete to Switch. (
Fig. 26
)
4) Put the assembly of Gear section and Motor section
in place on Housing (R), then fasten Housing (L) to
Housing (R) as drawn to
left in Fig. 22
.
Note:
Do not forget to install Plate and Lens on Housing (R).
See
Figs. D-2 and D-3
for detailed information on wiring.
Note:
Ribs to hold Switch unit must face
the top side of the machine.
Fig. 26
ribs to hold
Switch unit
Motor bracket
Lead wire
of Endbell complete
