4
battery pack or tool is clean and dry before plugging into charger. Ensure that batteries are charged using the correct
charger recommended by the manufacturer. Incorrect use may result in a risk of electric shock, overheating or leakage
of corrosive liquid from the battery.
20. Have your tool repaired by a qualified person.
This tool is constructed in accordance with the relevant safety requirements. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in considerable danger to the user.
21. Disposal of battery.
Ensure battery is disposed of safely as instructed by the manufacturer.
ADDITIONAL SAFETY RULES FOR TOOL
ENB026-1
1. Be aware that this tool is always in an operating condition, because it does not have to be plugged into an
electrical outlet.
2. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact
hidden wiring. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the
operator.
3. Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.
ELECTRICAL SAFETY
PARTS IDENTIFICATION
1. LED light
2. LED light On/Off switch
3. Forward / reverse selector and On/Off switch
4. Screwdriver bit holder
5. Handle folding bush
6. Carrying strap
7. Charging socket
8. Charging adaptor
9. Charging plug
10. Carrying/storage case
WARNING: Read these safety instructions carefully before connecting the charger to the mains
supply. Make sure that the voltage of the electricity supply is the same as that indicated on the
rating plate on the charger.
This charger has been designed to operate on 230 V AC 50 Hz. Connecting it to any other power
source may cause damage to the tool. Do not allow the cordless screwdriver to be exposed to rain
or moisture.
This symbol indicates that this charger is a Class II appliance and does not require an Earth
connection.