![background image](http://html.mh-extra.com/html/makita/5103r/5103r_instruction-manual_230155003.webp)
3
ENGLISH (Original instructions)
Explanation of general view
1-1. Lever
2-1. Clamping screw
3-1. Base plate
4-1. Top guide
4-2. Base
5-1. 60
゚
angle cuts
5-2. 45
゚
angle cuts
5-3. 30
゚
angle cuts
5-4. Straight cuts
5-5. Blade
5-6. Base
5-7. Top guide
6-1. Setting protuberances
6-2. Hex socket head bolt
(For adjusting riving knife)
6-3. Setting protuberances
6-4. Cutting depth
7-1. Lock-off button
7-2. Switch trigger
8-1. Hex wrench
8-2. Shaft lock
9-1. Hex socket head bolt
9-2. Outer flange
9-3. Saw blade
9-4. Inner flange
10-1. Vacuum cleaner
13-1. Limit mark
14-1. Screwdriver
14-2. Brush holder cap
SPECIFICATIONS
Model
5603R 5703R 5705R 5903R 5103R 5143R
Blade diameter
165 mm
190 mm
190 mm
235 mm
270 mm
355 mm
at 90°
54 mm
66 mm
66 mm
85 mm
100 mm
130 mm
Max. cutting depth
at 45°
38 mm
46 mm
46 mm
64 mm
73 mm
90 mm
No load speed (min
-1
)
5,000 4,800 4,800 4,500 3,800 2,700
Overall length
330 mm
356 mm
356 mm
400 mm
442 mm
607 mm
Net weight
4.9 kg
5.7 kg
5.7 kg
7.2 kg
9.4 kg
14.0 kg
Safety class
/II
/II
/II
/II
/II
/II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE078-2
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece. With
appropriate Makita genuine saw blades, other materials
can also be sawed.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
For model 5705R
ENF100-1
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause
voltage fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.37 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected
with a fuse or protective circuit breaker having slow
tripping characteristics.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model 5603R
Sound pressure level (L
pA
) : 91 dB(A)
Sound power level (L
WA
) : 102 dB(A)
Uncertainty (K) : 3 dB(A)
Model 5143R
Sound pressure level (L
pA
) : 88 dB(A)
Sound power level (L
WA
) : 99 dB(A)
Uncertainty (K) : 3 dB(A)
Model 5703R, 5705R, 5903R
Sound pressure level (L
pA
) : 92 dB(A)
Sound power level (L
WA
) : 103 dB(A)
Uncertainty (K) : 3 dB(A)
Model 5103R
Sound pressure level (L
pA
) : 87 dB(A)
Sound power level (L
WA
) : 98 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
Содержание 5103R
Страница 79: ...79 ...
Страница 80: ...80 Makita Corporation Anjo Aichi Japan www makita com 884364A969 ...