![background image](http://html.mh-extra.com/html/makita/5094d/5094d_instruction-manual_230142007.webp)
7
clamp it down. DO NOT TRY TO HOLD
SHORT PIECES BY HAND!
18.
Never attempt to saw with the circular saw
held upside down in a vise. This is
extremely dangerous and can lead to seri-
ous accidents.
19.
WARNING: Blade coasts to stop after
switch is released. Contact with coasting
blade can cause serious injury. Before
setting the tool down after completing a
cut, be sure that the lower (telescoping)
guard has closed and the blade has come
to a complete stop.
20.
Some material contains chemicals which
may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow mate-
rial supplier safety data.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
SYMBOLS
USD301-1
The followings show the symbols used for tool.
V
....................... volts
................... direct current
.................... no load speed
.../min
................ revolutions or reciprocation per
minute
Fig. 5
Fig. 6
Fig. 7
n
˚