Makita 4351TJ, Инструкция по эксплуатации

Страница: 10 / 52

10
For European countries only
ENG102-2
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
): 85 dB (A)
Sound power level (L
WA
): 96 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection.
ENG220-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-11:
For Model 4351T
Work mode: wood cutting
Vibration emission (
a
h, CW
): 7 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG304-1
Work mode: metal cutting
Vibration emission (
a
h, CM
): 4.5 m/s
2
Uncertainty (K): 1.5 m/s
2
For Model 4351CT, 4351FCT
Work mode: wood cutting
Vibration emission (
a
h, CW
): 6.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG304-1
Work mode: metal cutting
Vibration emission (
a
h, CM
): 4.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG901-1
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
ENH101-12
EC Declaration of Conformity
We Makita Corporation as the responsible manufac-
turer declare that the following Makita machine(s):
Designation of Machine: Jig Saw
Model No./ Type: 4351T, 4351CT, 4351FCT
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorized
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, MK15 8JD, England
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN