P 2 / 6
R
epair
[2] LUBRICATION
Apply Makita grease N. No.1 to the following portions designated by black triangle to protect
parts and product from unusual abrasion.
Bearing extractor, small (No.1R269), Retaining ring S and R pliers (No.1R291), Water pump pliers (commercial one)
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Removing Base and Wheel Cover
Fig. 1
Fig. 2
Fig. 3
[1] NECESSARY REPAIRING TOOLS
CAUTION: Remove the wheel from the machine for safety before repair/ maintenance !
Amount to apply
Spindle
17
Lock spring 24
26
The surface that contacts Spiral bevel gear 48
Outside surface
Gear housing
32
1) Remove Base by unscrewing an M8x20 Wing bolt and two M6 Shoulder hex bolts. (Fig. 2)
2) Remove Pressure plate by unscrewing three M5x14 Hex bolts. (Fig. 3)
Gear room
approx. 1g
approx. 1g
approx. 40g
Pressure plate
Hex bolt M5x14
(3pcs)
Item No.
Description
Portion to lubricate
Fig. 4
3) By removing two M8x20 Hex bolts, the Wheel cover section can now be removed. (Fig. 4)
Note: Be careful not to lose Plate B.
Spiral bevel gear 57
Shoulder hex bolt M6 (2pcs)
Base
Spring washer 8
Flat washer 8
Wing bolt M8x20
Hex bolt M8x20 (2pcs)
Plate B
