Makita 407, Инструкция по эксплуатации

Страница: 4 / 8

4
holder hook. Spread the bag around the top of the tank.
Follow instructions of ''Installing cloth filter'' for installing
the bag so that the filter hook of cloth filter holds the bag.
NOTE:
•
Polyethylene bag (45 L) can be used. More than
0.04 mm thick one is recommended.
•
Too much dust will tears the bag easily, so do not
collect the dust more than the half of the bag
capacity.
Installing cloth filter
CAUTION:
The cloth filter is for dry/wet application, so install it for
wet use also.
1
2
3
4
008454
Install the cloth filter on the tank. Always be sure that
there is no gap between the filter hook on the cloth filter
and the tank after installing.
OPERATION
Dust disposal
CAUTION:
•
Always be sure that the tool is switched off and
disconnected to a power source before disposing
the dust.
•
Do not handle the tank roughly, it may damage the
tool.
•
Empty the tool everyday before the tank becomes
too full. Or, the suction force will weaken.
1
2
008451
Unlock the hook and lift the cowling upward. Remove
dust or particles adhering to the cloth filter.
NOTE:
•
Take the polyethylene bag out of the tool carefully
so that the protrusions of the tank will not tear the
bag apart.
•
Too much dust will tears the bag easily, so do not
collect the dust more than half of the bag capacity.
Storage of accessories
1
2
3
008455
Both the straight pipe and bent pipe can be stored after
use just by inserting them in the holes in the cleaner
base.
1
008456
A pipe holder is equipped on the side of the cleaner to
keep the straight/bent pipe out of the way during
vacuuming breaks.
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
Cleaning
1
2
3
008452
1. Cloth filter
2. Tank
3. Frame
1. Pipe holder
1. Bent pipe
2. Cleaner base
3. Straight pipe
1. Cowling
2. Hook
1. Filter hook
2. Tank
3. Cloth filter
4. Polyethylene
bag