11 ENGLISH
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen.
If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly.
If the cartridge does not slide in easily, it is
not being inserted correctly.
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
►
Fig.6:
1.
Indicator lamps
2.
Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps
Remaining
capacity
Lighted
Off
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
(For LXT battery only)
Charge the
battery.
(For LXT battery only)
The battery
may have
malfunctioned.
NOTE:
Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Using the soft bended rod antenna
When listening to FM radio stations, straight up the soft
bended rod antenna as shown in the figure.
►
Fig.7:
1.
Soft bended rod antenna
NOTICE:
Always store the soft bended rod antenna
to the original position after use.
Using Supplied AC power adaptor
WARNING:
Always disconnect the AC power
adaptor completely before moving the radio. If the
AC power adaptor is not removed, it may cause
an electric shock.
WARNING:
Never pull and/or drag the cord
of the AC power adaptor. If not, the radio may
accidentally fall down, causing injury to you or
someone around you.
WARNING:
The AC power adaptor is used as
the means of connecting the radio to the mains
supply.
The mains socket used for the radio must
remain accessible during normal use.
WARNING:
In order to disconnect the radio,
the AC power adaptor should be removed from
the mains outlet completely
WARNING:
Use the AC power adaptor sup-
plied with the product or specified by Makita only.
WARNING:
Do not hold the power supply
cable and plug by your mouth.
Doing so might
cause an electric shock.
WARNING:
Do not handle the plug with wet or
greasy hand.
WARNING:
Damaged or entangled cords
increase the risk of electric shock. If the cord
is damaged, have it replaced by our authorized
service center in order to avoid a safety hazard.
Do not use it before repair.
WARNING:
After use, always store AC power
adaptor out of the reach of children.
Open the cover and insert the adaptor plug into the DC
IN socket on the side of the radio. Plug the adaptor into
a standard mains socket outlet. While the radio is pow-
ered from AC power adaptor, the indicator for AC power
supply (
) will appear on the display.
►
Fig.8:
1.
Cover
2.
DC IN socket
3.
Adaptor plug
NOTE:
When the adaptor is used, the radio is pow-
ered from the mains and the battery cartridge is
charged.
NOTE:
When the radio has any interference in AM
band by its AC adaptor, move the radio away from the
AC adaptor further than 30 cm (1 feet).
Auxiliary input socket
►
Fig.9:
1.
AUX IN 1
2.
AUX IN 2
Two 3.5 mm stereo auxiliary input sockets are provided.
One is at the front of the radio (AUX IN 1); the other is
located in the battery compartment (AUX IN 2).
1.
Connect an external audio source, such as a MP3
or CD player, to the auxiliary input socket.
2.
Repeatedly press and release the Source but-
ton until AUX IN 1 or 2 is displayed.
3.
Adjust the volume setting on your external audio
source to ensure an adequate signal level. After that,
use the Tuning control knob on the radio as needed
for comfortable listening.
Содержание 0088381899512
Страница 2: ... a b c d e f 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 3 Fig 1 2 ...
Страница 3: ...6 5 11 12 10 8 9 16 1 2 3 4 18 7 13 14 15 17 Fig 2 1 2 Fig 3 1 Fig 4 3 ...
Страница 4: ...1 2 3 3 4 4 Fig 5 1 2 Fig 6 1 Fig 7 2 1 3 Fig 8 1 2 Fig 9 1 Fig 10 4 ...
Страница 5: ...1 2 3 Fig 11 1 2 3 Fig 12 1 Fig 13 5 ...